论文信息

S. Mohammed Junaid / R. Ravi / C. Ramachandran 等 4 人

Discover Geoscience

论文解读

AI 辅助整理
方法
IRS LISS-III影像与12个致灾因子,AHP加权叠加及GIS空间分析。
发现
高与极高易发区仅占24%,却覆盖约82%的已观测滑坡点。
机会点
可将滑坡易发性图层与山地农业用地、道路和聚落叠加,评估农业设施与耕地风险。

论文摘要

摘要 滑坡是丘陵地区的主要地质灾害,常导致人员伤亡、基础设施损毁和环境退化。本研究提出了一种融合地理空间技术与地面观测的滑坡易发性评价综合方法。在GIS框架下,采用基于层次分析法(Analytical Hierarchy Process, AHP)的加权叠加分析,整合了12个滑坡致灾因子。研究对IRS LISS-III卫星影像、排水网络、坡度、坡向、地质、地貌和土地利用等多个专题图层在GIS框架内进行处理与分析,通过加权指数叠加技术生成滑坡易发性分区。研究采用多准则评价方法识别并划分滑坡易发区域,其中降雨——尤其是2024年12月1日的极端事件(238 mm)——被确定为关键触发因素。谢瓦罗扬丘陵(Shevaroyan Hills)大范围区域呈现的高滑坡易发性主要受控于密集的排水网络、大量道路切坡开挖以及不利的硬岩地质条件,尤其是高度风化和破碎的紫苏花岗岩(charnockite)与片麻岩(gneiss)地层,其间夹杂富黏土带。断裂带是导致边坡失稳和滑坡发生的关键因素。易发性图将研究区划分为极高易发区(1.06%)、高易发区(23.18%)、中等易发区(56.41%)、低易发区(6.32%)和极低易发区(13.03%)。验证结果表明,约82%的已观测滑坡点位于高和极高易发区内。研究结果为风险评估、灾害防备和可持续土地利用规划提供了重要见解。滑坡易发性区划图可为政策制定者、城市规划者和环境管理者在减轻未来滑坡灾害和增强区域韧性方面提供有价值的工具。

全文

Discover Geoscience

Discover GeoscienceJunaid et al. Discover Geoscience (2026) 4:456
https://doi.org/10.1007/s44288-026-00818-6
RESEARCH Open Access
Landslide susceptibility zonation mapping
of the Shevaroyan Hills in the Eastern Ghats
using remote sensing, GIS techniques
and weighted overlay analysis
S. Mohammed Junaid1* , R. Ravi2, C. Ramachandran1 and N. S. Syed Roshan1
*Correspondence:
S. Mohammed Junaid
geojunaid12345@gmail.com
1Government Arts College
(Autonomous), Salem,
Tamil Nadu 636007, India
2Annamalai University, Annamalai
Nagar, Chidambaram,
Tamil Nadu 608002, India
© The Author(s) 2026. Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use,
sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the
source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article
are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the
article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to
obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Abstract
Landslides are a major geological hazard in hilly regions, often resulting in loss
of life, damage to infrastructure, and environmental degradation. An integrated
methodology for landslide susceptibility assessment is presented in this study,
utilizing geospatial technology and ground-based observations. Twelve landslide-
conditioning factors were integrated using an Analytical Hierarchy Process (AHP)-
based weighted overlay analysis within a GIS framework. Multiple thematic layers
such as IRS LISS-III satellite imagery, drainage networks, slope, aspect, geology,
geomorphology, and land use were processed and analyzed within a GIS
framework to generate landslide susceptibility zones through a weighted index
overlay technique. Using a multi-criteria evaluation approach, the study identifies
and classifies landslide-prone areas, with rainfall particularly the extreme event of
December 1, 2024 (238 mm) emerging as a key triggering factor. The high landslide
susceptibility observed across large parts of the Shevaroyan Hills is mainly controlled
by dense drainage networks, extensive road cut excavations, and unfavorable hard
rock geological conditions, particularly highly weathered and fractured charnockite
and gneiss formations interspersed with clay-rich zones. Fracture zones are a key
factor contributing to slope instability and landslide occurrence. The susceptibility
map classified the study area into very high (1.06%), high (23.18%), moderate
(56.41%), low (6.32%), and very low (13.03%) susceptible zones. The verification results
showed that approximately 82% of the observed landslide locations occurred within
the high and very high susceptibility zones. The findings provide crucial insights
for risk assessment, disaster preparedness, and sustainable land-use planning. The
Landslide susceptibility zonation map serves as a valuable tool for policymakers,
urban planners, and environmental managers in mitigating future landslide hazards
and enhancing regional resilience.
Keywords Landslide susceptibility, Remote sensing, GIS, Weighted, Hazard mapping,
Risk assessment

Page 2 of 23
Junaid et al. Discover Geoscience (2026) 4:456
1 Introduction
Landslides, a significant natural hazard in hilly terrains, are triggered by factors such as
intense rainfall, earthquakes, deforestation, complex geological and tectonic settings,
farming and other human activities. These events lead to severe damage to property,
infrastructure and human lives [ 1–3]. To mitigate such disasters, landslide susceptibil -
ity mapping (LSM) is a crucial tool for assessing, planning and reducing landslide risks.
Several studies worldwide [ 4–13] have utilized LSM to identify landslide susceptibil -
ity zones (LSZ). Geographic information systems (GIS) play a vital role in this process,
offering spatial, temporal, and repetitive data coverage for better analysis of landform
changes caused by natural (tectonic activity, slope failure, volcanic eruptions) and
human-induced factors (deforestation, urban expansion, road construction, tourism,
and resource extraction) [71, 14–17]. Landslides are complex phenomena resulting from
the interaction of intrinsic characteristics and external triggering factors. Based on pre -
liminary geotechnical investigations, [ 18] proposed different grades of landslide suscep -
tibility for the Himalayan region. Earlier research has demonstrated that the stability
of slopes is primarily regulated by intrinsic parameters, such as geological conditions
(lithology, soil characteristics, structural discontinuities, shear strength of materials, and
groundwater regime), slope geometry (inclination, aspect, elevation, and curvature),
and land use and land cover patterns [19, 20]. Defined landslide hazard as the process of
dividing land into relatively homogeneous zones or domains, and ranking them based on
their degree of actual or potential landslide susceptibility, hazard, risk, and the applica -
bility of specific landslide-related regulations [21].
In the weighted overlay method, weights are assigned according to the relation -
ship between landslide-controlling factors and the occurrence of landslides. Panikkar
and Subramaniyan, [ 22] performed a landslide hazard assessment using a GIS-based
weighted overlay approach in areas around Dehradun and Mussoorie - regions then
in Uttar Pradesh and now in Uttarakhand, India. Their findings highlighted how rapid
deforestation and urbanization have driven increased landslide activity there. Other
research has similarly evaluated the relative roles of landslide triggers [ 23], with one
study showing that a bivariate discriminant function effectively weights and ranks caus -
ative variables to produce susceptibility maps [ 24]. A comprehensive analysis of local
geological characteristics, along with an inventory of past landslides and available histor-
ical slope failure data, would significantly enhance the model. Multiple-criteria decision
analysis, which integrates the weighted overlay method and the Analytical Hierarchy
Process (AHP), has been shown to provide higher accuracy in landslide hazard assess -
ment [25, 26].
These technologies enable the creation of landslide inventory and thematic maps to aid
in risk assessment and disaster preparedness. This study focuses on the landslide in the
Eastern Ghats of Shevaroy Hills caused by heavy rainfall, emphasizing the importance
of LSM in identifying vulnerable area. A key priority in road design is the mitigation of
slope failure risks to ensure the safety of human life and the protection of infrastructure.
The integration of GIS in this research helps in analyzing the extent and causes of the
landslide, providing crucial insights for future hazard mitigation and sustainable land-
use planning in the region.
While previous investigations in the Yercaud/Shevaroyan Hills have applied fuzzy
gamma operators [ 27] and cut-slope stability analysis [ 28] largely restricted to the

Page 3 of 23
Junaid et al. Discover Geoscience (2026) 4:456
Yercaud Ghat Road corridor, and frequency ratio methods have been applied in the
neighbouring Nilgiris [ 29], these studies do not cover the full 382.67 km² Shevaroyan
Hills massif, nor do they incorporate a field-verified inventory tied to a single, dated
extreme rainfall event. The present study addresses this gap by (i) extending suscepti -
bility zonation across the entire Shevaroyan Hills rather than the road corridor alone,
(ii) anchoring the analysis to the 1 December 2024 extreme rainfall event (238 mm) as
a discrete, dateable trigger, and (iii) supporting the model with a field-verified land -
slide inventory that includes GPS-located points and structural evidence (failure scarps,
transported boulders) rather than satellite interpretation alone.
The specific objectives of this study are to: (1) prepare a field-verified landslide inven -
tory for the Shevaroyan Hills using GPS-located survey points and satellite image
interpretation; (2) generate twelve landslide-conditioning thematic layers within a GIS
framework; (3) derive factor weights using the Analytical Hierarchy Process (AHP) and
integrate them through a weighted overlay analysis to produce a landslide susceptibility
zonation (LSZ) map; and (4) validate the resulting map against the field-verified inven -
tory using ROC-based assessment.
2 Materials and methods
2.1 Description of the study area
Yercaud is located in the Salem district of Tamil Nadu, India, in the Shevaroyan Hills,
which form part of the Eastern Ghats. The study area extends 11° 56’ 25.29”- 11° 43’
1.09” latitude 78° 7’ 36.85”- 78° 22’ 6.09” longitude and making it easily accessible from
Salem city, about 32  km to the southeast. Geographically, it is approximately 1,641  m
(5,384 feet) above sea level, offering a cool and moderate climate year-round (Fig. 1). The
region is covered by 58-I/1, 58-I/2, 58-I/5, and 58-I/6 (scale − 1:50,000) of Survey of India
(SOI) Toposheet.
Fig. 1 Study area map of Yercaud (Shevaroyan Hills)

Page 4 of 23
Junaid et al. Discover Geoscience (2026) 4:456
The total area of 382.67 Sq.km, with its terrain comprising undulating hills, valleys,
and plateaus. The region has a diverse topography, including rocky terrains, dense for -
ests, and agricultural lands, contributing to its ecological significance. Yercaud Lake,
located at the center of the hill station, is a prominent feature and serves as a major tour-
ist attraction. The area is bounded by the Cauvery River basin to the east and several
smaller tributaries that flow through the valleys, enriching the region’s hydrology. The
surrounding forests are part of the Eastern Ghats, with vegetation dominated by decidu -
ous and semi-evergreen species, supporting a rich biodiversity. The unique geographic
and climatic conditions of suitable for cultivating coffee, oranges, and spices, which form
the backbone of its agricultural economy.
2.2 Methodology and data used
The development of a landslide susceptibility map using GIS techniques involves sev -
eral key stages. First, the most relevant causative factors that significantly contribute to
landslide occurrence are identified. Next, a comprehensive spatial database is developed
through the preparation of thematic data layers. Numerical weights are then assigned
to each factor according to their relative influence on landslide occurrence. Finally,
the landslide susceptibility model is generated and its accuracy is evaluated through
validation techniques [ 30]. A total of 12 thematic layers of causative factors (Lithol -
ogy, Geomorphology, Rainfall, land use landcover, Lineament, DEM, Aspects, Hill -
shade, Roughness, slope, distance to roads, drainage density) were planned with respect
to study area to develop the final susceptibility map. A map registration technique was
applied to rectify the thematic maps. Subsequently, spatial databases for geology and
geomorphology were developed using ArcGIS version 10.8. IRS Resourcesat-1 LISS-III
satellite data (acquired on 17 October 2023) were obtained from the Bhuvan portal ( h
t t p : / / b h u v a n . n r s c . g o v . i n / d a t a / d o w n l o a d - / i n d e x . p h p ) . Land cover maps were generated
from LISS-III data (spatial resolution: 23.5 m) using a supervised classification approach
with the maximum likelihood algorithm in ERDAS IMAGINE version 9.0. The primary
datasets include the Digital Elevation Model (DEM) from USGS Earth Explorer, which
was used to derive slope, aspect, and roughness. Additional ancillary data, including
geological maps, fault lines, road networks, and seismic points, were compiled from map
sheets of the Geological Survey of India (GSI). These data were verified through field
investigations and satellite imagery analysis. All collected datasets were projected and
georeferenced in ArcGIS using the Universal Transverse Mercator (UTM Zone 43  N)
coordinate system based on the World Geodetic System (WGS 1984) datum. Rainfall
data from TN-SMART (Tamil Nadu System for Multi-Hazard Potential Impact Assess -
ment and Emergency Response Tracking) which is giving the up-to-date rainfall data
of Tamil Nadu, while land use and land cover (LULC) data from Esri & ESA aided in
landscape analysis. These datasets were processed using GIS-based multi-criteria evalu -
ation techniques to ensure comprehensive environmental impact assessment the main
data required for landslide susceptibility were collected from various sources are shown
in (Table 1) and the methodology involves data acquisition, thematic layer preparation,
weighted overlay analysis, and validation to assess landslide-prone zones (Fig. 2).

Page 5 of 23
Junaid et al. Discover Geoscience (2026) 4:456
Table 1 Data used for the study area
Data Data type Source (Year) Spatial resolution / scale
DEM Polygon coverage USGS Earth Explorer (2024) 30 m
Lineament Line coverage Geological Survey of India (2024) 1:50,000
Roads, Streams or Drainage Patterns Line coverage OpenStreetMap (2024)
Lithology, Geology, Geomorphology Polygon coverage Geological Survey of India (2024) 1:50,000
Rainfall Polygon coverage Tamil Nadu System for Multi-Hazard Potential Impact Assessment and Emergency Response Tracking (2024) 0.1° × 0.1° grid
LULC Polygon coverage Esri − (2024) 10 m resampled to 30 m
Landslide Points Points Field Investigation (2024) GPS Locations

Page 6 of 23
Junaid et al. Discover Geoscience (2026) 4:456
2.3 Inventory of landslide events
A landslide inventory map is an essential tool for compiling comprehensive informa -
tion about past and present landslide occurrences. In the Analytical Hierarchy Process
(AHP), understanding the factors that contribute to landslide initiation is crucial for
assigning appropriate weights and ratings. Therefore, the preparation of a detailed land -
slide inventory is necessary to evaluate the influence of geological formations, tectonic
structures (such as faults), hydrological conditions, and geomorphological characteris -
tics on slope instability. Landslide inventory maps can be developed using multiple data
Fig. 2 Methodology

Page 7 of 23
Junaid et al. Discover Geoscience (2026) 4:456
sources, including satellite imagery, field investigations, documented historical events,
published literature, and aerial photographs. Remote sensing techniques are particularly
effective for identifying landslides through the analysis of terrain morphology, spatial
patterns, surface contrasts, and distinctive landform shapes. In this study, the landslide
inventory map was generated using a combination of field survey data and satellite image
interpretation. During fieldwork in unstable zones, key indicators of slope movement
were carefully documented. These included signs of previous mass movement, tension
cracks, scarp faces, groundwater seepage, backward-tilted trees, and the visible bound -
aries of displaced materials. Information regarding the history, recurrence, and trigger -
ing factors of slope failures was also collected through field observations. Photographic
documentation of representative landslides is presented in Fig. 3.
2.4 Data collection and preprocessing
Various datasets were gathered from multiple sources to ensure a comprehensive analy -
sis of landslide susceptibility. The Digital Elevation Model (DEM) derived from SRTM/
ASTER was utilized to extract topographic parameters such as slope, aspect, and rough -
ness, which are critical in assessing terrain stability [ 31, 32]. Geological factors, such as
lithology, lineaments, and geomorphology, were incorporated to understand the struc -
tural composition and underlying rock formations contributing to slope instability of the
region [ 33, 34]. Rainfall data were obtained from TN-SMART and other meteorologi -
cal sources to evaluate precipitation influence, as rainfall significantly triggers landslides
[35, 36]. Additionally, a landslide inventory was compiled using historical records and
field surveys, serving as a crucial dataset for validating the model and improving the
accuracy of susceptibility zonation mapping (Van Westen et al. 2006; [37]).
2.5 GIS-Based on thematic maps generation
Thematic layers influencing landslides were created and analyzed to assess the suscep -
tibility of the study area. Climatic factors, particularly rainfall distribution and seasonal
variations, were analyzed to determine their impact on landslide occurrences, as intense
precipitation can trigger slope failures [ 35, 36]. Additionally, anthropogenic factors,
including land use/land cover (LULC) changes and proximity to road networks, were
considered to assess human-induced influences on terrain stability ([ 68, 73]). These the-
matic layers were integrated using GIS techniques to develop a comprehensive landslide
susceptibility zonation map ([37, 67]).
2.6 Weighted overlay analysis and landslide zonation
The thematic layers were assigned weights using the Analytical Hierarchy Process (AHP)
based on their relative influence on landslide occurrence [ 38, 39]. The thematic factors
were reclassified into susceptibility classes and subsequently integrated using a weighted
overlay analysis to generate the Landslide Susceptibility Zonation (LSZ) map. The
weighted overlay approach was selected because it allows the standardized susceptibil -
ity classes of the different conditioning factors to be integrated according to their rela -
tive AHP-derived influence weights within a common decision framework. In contrast,
a weighted sum represents a general linear combination of input values and is more
appropriate when continuous or directly comparable standardized values are intended
to be combined. The weighted overlay approach was therefore considered appropriate

Page 8 of 23
Junaid et al. Discover Geoscience (2026) 4:456
for the present study because the conditioning factors were represented as ranked sus -
ceptibility classes and integrated according to their relative importance (Figs. 4 and 5).
2.7 Validation and accuracy assessment
The LSZ map was validated using the field-based landslide locations (Fig.  6f). The ROC
curve was used to assess the discriminatory performance of the susceptibility model.
However, ROC-based assessment should be interpreted with consideration of the char -
acteristics and limitations of the available landslide inventory. The reliability of the vali -
dation is influenced by the completeness and spatial accuracy of the landslide inventory,
while the representation and selection of non-landslide/background locations can also
Fig. 3 Field investigations confirm the presence of landslide events in the study area. a–l illustrating debris flow
characteristics, including source-area erosion, exposed failure scarps, channelized movement of soil & rock mix -
tures, transported boulders, and depositional debris at the slope toe

Page 9 of 23
Junaid et al. Discover Geoscience (2026) 4:456
affect ROC-based measures. In addition, spatial autocorrelation among nearby land -
slide observations may reduce the effective independence of validation samples, and an
imbalance between landslide and non-landslide observations may influence the inter -
pretation of model performance.
The field-verified inventory used in this study comprises 12 observed landslide loca -
tions. Although these locations provide important ground-based evidence for evaluating
the susceptibility map, the relatively small sample size limits the statistical robustness
and generalizability of the validation. The AHP weights were derived through pairwise
comparison of the conditioning factors, while the resulting susceptibility map was evalu-
ated against the field-verified landslide locations. Nevertheless, because the inventory
is limited in size, the validation results should be interpreted as evidence of agreement
between the mapped susceptibility classes and the available field observations rather
than as a definitive measure of predictive performance.
Future studies should consider larger and more spatially representative landslide
inventories and independent validation datasets. Complementary performance mea -
sures, including precision, recall/sensitivity, specificity, F1-score, precision-recall anal -
ysis, and spatial cross-validation, could provide a more comprehensive assessment of
model performance and help reduce the limitations associated with reliance on a single
validation approach.
2.8 Interpretation and risk assessment
The final LSZ map identifies high-risk zones, aiding in disaster management, urban plan-
ning, and mitigation strategies for landslide-prone areas. (Van Westen et al. 2006; [ 40]).
The present study recommends slope stabilization, proper drainage management, and
afforestation to reduce landslide susceptibility [41, 42].
3 Result and discussions
3.1 Lithology and geology
The study area exhibits diverse lithological and geological characteristics, predominantly
composed of charnockite, gneiss, dolerite dykes, amphibolite, and dunite. Charnockite,
a high-grade metamorphic rock rich in quartz, feldspar, and hypersthene, dominates
the region and indicates granulite facies metamorphism (Fig. 5a). Dunite, an ultramafic
rock abundant in olivine, occurs in localized pockets, representing mantle-derived mate-
rial and suggesting tectonic activity. Other lithological units, including amphibolite,
Fig. 4 Rainfall precipitation in Yercaud (15.11.2024 to 30.12.2024)

Page 10 of 23
Junaid et al. Discover Geoscience (2026) 4:456
garnet gneiss, hornblende-biotite gneiss, pegmatite, peridotite, pyroxenite, and ultra -
mafic rocks, reflect a combination of deep crustal and mantle origins. Laterite forma -
tions, resulting from weathering and secondary mineralization, further characterize the
area. From a geomechanical perspective, these lithological units significantly influence
slope stability. Charnockite, despite its high compressive strength, can fail along folia -
tions and fractures (Fig. 5b) [69]. In contrast, dunite weathers into clay-rich soils, which
may be susceptible to landslides [ 65]. The variations in rock types and their mechanical
properties contribute to the geomorphological and geohazard dynamics of the region
[43].
Fig. 5 Thematic layers used for debris flow susceptibility analysis: a Geology b Lithology c Geomorphology d
Rainfall e Land use/Land cover f Lineament

Page 11 of 23
Junaid et al. Discover Geoscience (2026) 4:456
3.2 Geomorphology
The region predominantly comprises moderately dissected hills, pediments, and val -
leys shaped by erosional, structural, and depositional processes (Fig. 5c). The dark green
representation of these landforms indicates terrain sculpted by prolonged weathering
and fluvial activity. Pediments and pediplains signify erosional surfaces, while residual
landforms such as mounds and plateau remnants highlight ancient landscapes. Valley
fills and strike valleys further depict depositional environments influenced by sediment
transport and accumulation. Human-induced modifications, such as active quarries and
mine dumps, reflect significant geomorphic alterations. These features influence surface
water movement, soil development, and sediment dynamics, which in turn affect slope
stability ([72, 44]).
Fig. 6 a Digital Elevation Model b Aspect c Hill shade d Roughness e Slope f landslide locations

Page 12 of 23
Junaid et al. Discover Geoscience (2026) 4:456
3.3 Rainfall
The Rainfall Distribution Map of Yercaud shows spatial variation in precipitation, rang -
ing from 21.28 mm to 26.58 mm (Fig. 5d). Higher rainfall is observed in the western
and southwestern regions, while the central and eastern parts receive lower rainfall. The
Rainfall Precipitation Graph highlights a peak of 238 mm on December 1, 2024, with
additional spikes on December 15 (42 mm) and December 22 (34 mm). Rainfall is a criti-
cal landslide trigger, as it affects soil saturation, pore water pressure, and slope stability
[36, 45]. Sakthivel et al. (2025) used spatial-temporal model that the results identified
extreme rainfall events and distribution with a moderate level of accuracy in Yercaud,
Salem region. High-intensity rainfall events significantly increase landslide susceptibil -
ity by reducing the effective stress within slope materials (Iverson 2000). This variability
impacts groundwater recharge, surface runoff, and soil moisture.
3.4 Land use land cover
The Land Use Land Cover (LULC) Map of Yercaud provides a spatial representation of
various land cover types in the region, categorized into water bodies, forest, cropland,
built-up area, and barren land (Fig. 5e). The dominant land cover is forest (green), which
occupies a significant portion of the study area, highlighting the ecological significance
of the region. Water bodies (blue) are sparsely distributed, playing a crucial role in sus -
taining biodiversity and groundwater recharge. Cropland (yellow) is present in patches,
indicating agricultural activities within the landscape. Built-up areas (red) are concen -
trated in certain locations, signifying urbanization and human settlements. Barren land
(light yellow) is observed in some regions, representing areas with minimal vegetation
or exposed soil. Deforestation, urbanization, and agricultural expansion alter soil prop -
erties, runoff characteristics, and vegetation cover, leading to increased landslide risk
([46–48, 66]). Built-up areas are particularly vulnerable due to modified drainage sys -
tems and increased surface loading [63].
3.5 Lineament
The lineament map represents the structural framework of the region, highlighting vari -
ous geological discontinuities such as faults, fractures, and joints (Fig. 5f). The map cat -
egorizes lineaments into three types: drainage-parallel lineaments (red), joint/fracture
lineaments (green), and ridge-parallel lineaments (purple). Drainage-parallel lineaments
indicate structural control over surface water flow, suggesting the influence of fractures
and faults on the drainage pattern. Joints perpendicular to the foliation planes of the
rocks and fracture lineaments represent zones of structural weakness, which can act
as potential pathways for groundwater movement and influence rock weathering pro -
cesses. Ridge-parallel lineaments correspond to structural alignments related to topo -
graphic features, revealing the influence of tectonic forces on landscape evolution. The
lineament map highlights geological discontinuities, such as faults, fractures, and joints,
which significantly impact groundwater movement and slope stability [ 49]. Lineaments
often act as zones of weakness, making slopes more prone to mass wasting [70].
3.6 Digital elevation model
Elevation plays a crucial role in landslide occurrences, both directly and indirectly ([ 64,
50]). An increase in elevation often results in steeper slopes, reducing the shear strength

Page 13 of 23
Junaid et al. Discover Geoscience (2026) 4:456
of slope materials and making them more susceptible to failure [ 35]. Additionally, eleva-
tion influences climatic factors such as rainfall and temperature, which further contrib -
ute to slope instability [51]. The DEM for Yercaud ranging from 318 to 1,636 m above sea
level (Fig. 6a).
3.7 Aspect
Aspect refers to the direction that a slope faces, measured in degrees from 0° (north) to
360°. The classification in the map highlights variations in slope orientation, which play
a significant role in environmental and geomorphological processes (Fig. 6b) [52]. The
aspect values are represented using a color gradient, where dark green (-70.23 to 31.02)
signifies flat areas or north-facing slopes, light green (31.02 to 132.29) represents north -
east- to east-facing slopes, yellow (132.29 to 233.55) corresponds to southeast- to south-
facing slopes, orange (233.55 to 334.81) indicates southwest- to west-facing slopes, and
red (334.81 to 436.07) represents northwest-facing slopes or steep inclinations. Aspect
influences microclimatic conditions, solar radiation exposure, and moisture retention,
which affect vegetation growth and slope stability [53].
3.8 Hillshade
Hillshade representation of terrain illumination by simulating the effects of light and
shadow on the landscape (Fig. 6c). Hillshade analysis is derived from a Digital Elevation
Model (DEM) and is calculated using altitude and azimuth angles to determine how ter -
rain features interact with light sources (Moore et al. 1991). The hillshade values range
from 1 to 255, where lower values (1–51, represented in dark green) indicate shaded or
less illuminated areas, while higher values (204–255, shown in red) correspond to well-
lit or sun-exposed regions. Shaded regions often indicate lower soil moisture evapora -
tion, whereas sun-exposed slopes are more prone to desiccation and erosion [54].
3.9 Roughness
The Roughness Map illustrates the terrain variability, with roughness values rang -
ing from 0.97 to 277.11 (Fig.  6d). The low roughness areas (0.97–56.20), shown in dark
green, indicate relatively flat terrains, primarily in the southern and central regions.
Moderate roughness zones (56.20–166.66) dominate the landscape, while high rough -
ness areas (221.89–277.11), marked in red, are concentrated along the elevated ridges
and steep slopes. Rough terrain is generally more susceptible to erosion and landslides
due to surface irregularities affecting soil cohesion and water infiltration (Schmidt and
Dikau 1999). The spatial distribution of roughness plays a significant role in influencing
surface runoff, soil erosion, and groundwater recharge.
3.10 Slope
The Slope represents the variation in terrain steepness, ranging from 1.7° to 50.99° (Fig.
6e). The low-slope areas (1.7–10.06°), depicted in dark green, are found in plains and
gentle terrains, making them suitable for agriculture and settlements. Moderate slopes
(10.06°–30.52°) dominate the landscape, while steep slopes (above 40.76°), shown in red,
are concentrated along hilly and rugged terrains, posing challenges for construction and
increasing soil erosion potential. Steeper slopes experience greater gravitational stress,
reducing material cohesion and making them more prone to failure [55]. The interplay of

Page 14 of 23
Junaid et al. Discover Geoscience (2026) 4:456
slope and other factors, such as geology and land cover, determines the overall stability
of a region (Meusburger et al. 2010).
In the Shevaroyan Hills specifically, the concentration of steep slopes (> 30°) in the
southern and southeastern sectors coincides spatially with zones of highly weathered,
fractured charnockite and gneiss, suggesting that slope steepness here compounds
rather than acts independently of lithological weakness—a pattern consistent with
weighted-overlay findings in the nearby Nilgiris [29].
3.11 Distance to road
The Distance to Road map employs a color gradient where red indicates areas close to
roads (0.00–0.02 km), transitioning through yellow (0.02–0.05 km) to green, which rep -
resents areas farther from the road network (0.05–0.08 km). The road network is con -
centrated along valleys and lower elevation zones, while higher elevation and interior
regions exhibit greater distances from roads. Human activities, such as road construc -
tion, can exacerbate slope instability by modifying natural drainage patterns and increas-
ing slope load (Fig. 7a) [56].
3.12 Distance to stream
The Distance to Stream map employs a color gradient the color-coded classification
highlights areas close to streams in red (0–240 m), transitioning through yellow (240–
587 m) to green, which represents regions farther from the stream network (587–2,457
m) (Fig. 7b). The stream network is densely distributed, primarily following the natu -
ral drainage pattern influenced by topography. Streams contribute to slope erosion and
undercutting, increasing the likelihood of landslides, particularly in unconsolidated
materials [57].
3.13 Assignments of weightage for the thematic layers
After assessing all factors independently, a weighted overlay analysis (WOA) was per -
formed. For WOA, a five-step landslide susceptibility scale was used: very low, low,
medium, high, and very high susceptibility. The weight for each factor is given in
(Table 2). Rainfall, with a weight of 25%, was identified as the most influential factor in
landslide susceptibility assessment. The second most significant factor was Land Use
Land Cover, which played a crucial role in determining susceptibility levels. In contrast,
Fig. 7 a Distance to Road b Distance to Stream

Page 15 of 23
Junaid et al. Discover Geoscience (2026) 4:456
Table 2 Pairwise comparison matrix with derived AHP weights
Factor Lithology Geomorphology Rainfall LULC Lineament DEM Aspect Hill shade Roughness Slope Distance to roads Distance to stream AHP weight
Lithology 1.0000 1.0000 0.3333 0.5000 1.0000 1.0000 2.0000 2.0000 2.0000 1.0000 1.0000 1.0000 0.0712
Geomorphology 1.0000 1.0000 0.3333 0.5000 1.0000 1.0000 2.0000 2.0000 2.0000 1.0000 1.0000 1.0000 0.0712
Rainfall 3.0000 3.0000 1.0000 2.0000 5.0000 3.0000 7.0000 7.0000 7.0000 3.0000 3.0000 3.0000 0.2358
LULC 2.0000 2.0000 0.5000 1.0000 3.0000 2.0000 5.0000 5.0000 5.0000 2.0000 2.0000 2.0000 0.1510
Lineament 1.0000 1.0000 0.2000 0.3333 1.0000 1.0000 2.0000 2.0000 2.0000 0.5000 0.5000 0.5000 0.0565
DEM 1.0000 1.0000 0.3333 0.5000 1.0000 1.0000 2.0000 2.0000 2.0000 1.0000 1.0000 1.0000 0.0712
Aspect 0.5000 0.5000 0.1429 0.2000 0.5000 0.5000 1.0000 1.0000 1.0000 0.3333 0.3333 0.3333 0.0312
Hillshade 0.5000 0.5000 0.1429 0.2000 0.5000 0.5000 1.0000 1.0000 1.0000 0.3333 0.3333 0.3333 0.0312
Roughness 0.5000 0.5000 0.1429 0.2000 0.5000 0.5000 1.0000 1.0000 1.0000 0.3333 0.3333 0.3333 0.0312
Slope 1.0000 1.0000 0.3333 0.5000 2.0000 1.0000 3.0000 3.0000 3.0000 1.0000 1.0000 1.0000 0.0832
Distance to Roads 1.0000 1.0000 0.3333 0.5000 2.0000 1.0000 3.0000 3.0000 3.0000 1.0000 1.0000 1.0000 0.0832
Distance to Stream 1.0000 1.0000 0.3333 0.5000 2.0000 1.0000 3.0000 3.0000 3.0000 1.0000 1.0000 1.0000 0.0832
Consistency λmax CI CR RI Decision
12.098 0.008943 0.005777 1.548 PASS

Page 16 of 23
Junaid et al. Discover Geoscience (2026) 4:456
aspect and roughness were assigned the lowest weights, indicating their relatively minor
impact. Based on the landslide susceptibility analysis, different susceptibility levels were
classified.
The derived AHP weights indicate that rainfall was the most influential condition -
ing factor, with a weight of 0.2358 (23.58%), followed by land use/land cover (LULC)
with 0.1510 (15.10%). Slope, distance to roads, and distance to streams each contrib -
uted 0.0832 (8.32%), while lithology, geomorphology, and DEM were assigned weights
of 0.0712 (7.12%) each. Lineament received a weight of 0.0565 (5.65%), whereas aspect,
hillshade, and roughness had the lowest weights of 0.0312 (3.12%) each. The consistency
assessment yielded a maximum eigenvalue (λmax) of 12.098, a Consistency Index (CI) of
0.008943, and a Consistency Ratio (CR) of 0.005777, using an RI of 1.548 for 12 factors,
confirming that the pairwise comparison matrix was consistent (CR < 0.10). These AHP-
derived weights were subsequently applied to the standardized thematic layers in the
GIS-based weighted overlay analysis to generate the final landslide susceptibility zona -
tion map (Fig. 8).
3.14 Landslide points and their elevation profile
The elevation profiles, represented as cross-sections of the terrain, show a consistent
downward slope, with varying degrees of steepness. Such profiles provide insight into
the topographic characteristics of the affected region and help assess the potential
Fig. 8 ROC curve for the landslide susceptibility model

Page 17 of 23
Junaid et al. Discover Geoscience (2026) 4:456
impact of gravitational mass movement [ 58]. Generally, steeper slopes with abrupt ele -
vation changes are more susceptible to landslides due to gravitational forces and weaker
lithology.
Key observations from the elevation profiles include:
Steep Gradient Sections: Certain locations along the profile show sharp declines,
which may indicate regions of active or past slope failure. These sections can act as ini -
tiation zones for landslides.
Gradual Slopes Leading to Valleys: The profiles suggest the movement of debris
downslope, often depositing materials in lower-lying regions, which may affect water
bodies and infrastructure.
Road Networks and Human Influence: The presence of winding roads near these land-
slide points suggests potential anthropogenic influences such as deforestation, slope cut-
ting, and improper drainage management, which can exacerbate landslide occurrences
[51].
Cross-profile analysis of landslides is crucial for hazard assessment, as it helps in iden -
tifying critical zones requiring mitigation measures. Remote sensing and GIS-based
techniques provide efficient methods for monitoring terrain dynamics and assessing
landslide risk in vulnerable regions (Fig. 9a, b) [59].
3.15 Landslide susceptibility map
The Landslide Susceptibility Zonation (LSZ) map of Yercaud illustrates the spatial distri-
bution of landslide-prone areas using a weighted overlay analysis (WOA) approach. The
map categorizes the region into five susceptibility zones: very low, low, medium, high,
and very high susceptibility. The southern and southeastern portions of Yercaud exhibit
high to very high susceptibility, indicating areas with elevated landslide risk. These zones
are primarily influenced by steep slopes, lithology, drainage density, and anthropogenic
activities [50, 60]. In contrast, the northern and western regions display low to very low
susceptibility, suggesting relatively stable terrain.
The final susceptibility map also incorporates the field-verified landslide inventory
locations and selected important reference points to facilitate spatial interpretation of
the susceptibility classes. The distribution of the observed landslide locations provides a
visual basis for comparing the mapped susceptibility zones with field observations. The
inclusion of reference locations further improves map readability and enables the sus -
ceptibility pattern to be interpreted in relation to the major geographic and infrastruc -
ture features of the study area.
The integration of thematic layers such as the Digital Elevation Model (DEM), slope,
aspect, rainfall, and land use land cover (LULC) played a critical role in delineating land-
slide-prone areas [ 61]. Rainfall, with the highest weightage, emerged as the most sig -
nificant contributing factor, emphasizing the impact of intense precipitation on slope
instability [62].
The results indicate that moderate susceptibility zones occupy the largest portion
of the study area, accounting for approximately 56.41% of the total area. These zones
represent areas where landslides may occur under favorable triggering conditions such
as intense rainfall or slope disturbances. Areas classified as high susceptibility cover
approximately 23.18% of the study area and are mainly located in regions characterized
by steep slopes, fractured geological formations, and proximity to roads and drainage

Page 18 of 23
Junaid et al. Discover Geoscience (2026) 4:456
networks. These areas are considered more vulnerable to slope instability and require
careful monitoring and management. The very high susceptibility zones, which repre -
sent the most landslide-prone areas, occupy about 1.06% of the total study area. These
locations are typically associated with steep terrain, highly weathered rock formations,
and areas affected by anthropogenic activities such as road cutting and slope excavation.
In contrast, low susceptibility zones account for approximately 6.32%, while very low
Fig. 9 a Show the 3D view of the Yercaud and the Landslide Points observed in the field. b Landslide Points and
their Elevation Profile for example

Page 19 of 23
Junaid et al. Discover Geoscience (2026) 4:456
susceptibility zones cover about 13.03% of the study area (Fig.  9). These areas generally
consist of relatively stable terrains with gentle slopes and favorable geological conditions.
The spatial distribution of susceptibility zones highlights the influence of topographic,
geological, climatic, and anthropogenic factors on landslide occurrence in the Shevar -
oyan Hills. The susceptibility zonation map therefore provides valuable information for
identifying high-risk areas and supports effective land-use planning and disaster risk
reduction strategies (Fig. 10).
4 Limitations
This study has certain limitations that should be acknowledged. The rainfall analy -
sis was based on a short-term record centred on the December 2024 event rather than
long-term climatology. In addition, the landslide inventory, although field-verified at
12 locations, remains modest in size for statistically robust validation. The reliability of
ROC-based validation is dependent on the quality, completeness, and spatial distribu -
tion of the landslide inventory and can also be influenced by the selection of non-land -
slide/background observations, spatial autocorrelation, and class imbalance. Therefore,
the validation results should be interpreted cautiously and should not be considered
as a definitive measure of model performance. The possibility of improving validation
through larger independent inventories, precision-recall analysis, sensitivity, specific -
ity, F1-score, and spatial cross-validation should be considered in future studies. Despite
Fig. 10 Landslide susceptibility zonation map derived from the weighted overlay method, showing the five sus -
ceptibility classes, field-verified landslide inventory locations, and selected important reference points

Page 20 of 23
Junaid et al. Discover Geoscience (2026) 4:456
these limitations, the landslide susceptibility zonation map provides a practically appli -
cable spatial framework for identifying areas requiring attention for slope-stabilization
works, infrastructure planning, land-use management, and disaster risk reduction.
5 Conclusion
This study presents a GIS-based landslide susceptibility assessment for the Shevaroyan
Hills (Yercaud) in the Eastern Ghats of Tamil Nadu, India. By integrating remote sensing
data, field observations, and multi-criteria decision analysis, the study evaluated the spa -
tial distribution of landslide-prone areas using the Analytical Hierarchy Process (AHP)
and weighted overlay analysis. A total of twelve landslide-conditioning factors were con-
sidered in the analysis, including elevation, slope, aspect, hillshade, terrain roughness,
lithology, geomorphology, lineament, rainfall, land use/land cover, distance to roads,
and distance to drainage. These thematic layers were generated using various geospa -
tial datasets and processed within a GIS environment to determine their relative influ -
ence on slope instability. The final landslide susceptibility zonation map classified the
study area into five susceptibility zones: very low, low, moderate, high, and very high.
The results indicate that moderate susceptibility zones occupy the largest portion of the
study area (56.41%), followed by high susceptibility zones (23.18%), while very high sus -
ceptibility areas account for approximately 1.06% of the total area. These highly suscepti-
ble regions are mainly associated with steep slopes, fractured geological formations, and
areas influenced by human activities such as road construction. The analysis also high -
lights the significant role of rainfall in triggering landslides in the study area. A major
rainfall event of approximately 238 mm recorded on 1 December 2024 likely contributed
to increased slope instability in several locations within the Shevaroyan Hills. The vali -
dation results show that approximately 82% of the observed landslide locations corre -
spond with high and very high susceptibility zones, indicating a good spatial agreement
between the mapped susceptibility classes and the available field observations. However,
given the relatively small field-verified inventory of 12 landslide locations and the limita-
tions associated with ROC-based validation, this result should be interpreted cautiously
rather than as a definitive measure of predictive performance. Future studies incorpo -
rating larger independent inventories and complementary validation approaches would
strengthen the assessment of model reliability.
Acknowledgements
The author expresses sincere gratitude to all organizations and individuals whose support contributed to the successful
completion of this study. This work was independently conceived, initiated, and carried out by the author out of personal
research interest and motivation. The author gratefully acknowledges the data support provided by various agencies:
from USGS Earth Explorer, Geological Survey of India (GSI), OpenStreetMap; rainfall data from the Tamil Nadu System
for Multi-Hazard Potential Impact Assessment and Emergency Response Tracking (TNSMART). The author also extends
sincere thanks to his mentor and co-authors for their valuable guidance, technical inputs, and constructive suggestions
that improved the quality of the work.
Author contributions
S.M.J. conceived the study, conducted field investigations, collected and analyzed the data, performed GIS and remote
sensing analyses, prepared the figures and maps, interpreted the results, and wrote the original manuscript. R.R., C.R., and
N.S.S.R. critically reviewed the manuscript.
Funding
Not applicable.
Data availability
The datasets generated and/or analyzed during the current study are available from the corresponding author on
reasonable request.

Page 21 of 23
Junaid et al. Discover Geoscience (2026) 4:456
Declarations
Ethics approval and consent to participate
Not applicable. This study did not involve human participants, human data, or animals, and therefore did not require
ethical approval.
Consent for publication
Not applicable.
Competing interests
The authors declare no competing interests.
Received: 2 June 2026 / Accepted: 2 November 2026
References

  1. Basu T, Pal S. RS-GIS based morphometrical and geological multi-criteria approach to the landslide susceptibility mapping
    in Gish River Basin, West Bengal, India. Adv Space Res. 2019;63(3):1253–69.
  2. Kumar A, Sharma RK, Bansal VK. (2018). GIS-Based landslide hazard mapping along NH-3 in mountainous terrain of
    Himachal Pradesh, India using weighted overlay analysis. In International Conference on Sustainable Waste Management
    through Design (pp. 59–67). Cham: Springer International Publishing.
  3. Wu Y, Li W, Wang Q, Liu Q, Yang D, Xing M, Pei Y, Yan S. Landslide susceptibility assessment using frequency ratio, statistical
    index and certainty factor models for the Gangu County, China. Arab J Geosci. 2016;9(2):1–16.
  4. Binaghi E, Luzi L, Madella P , Pergalani F, Rampini A. Slope instability zonation: a comparison between certainty factor and
    fuzzy Dempster-Shafer approaches. Nat Hazards. 1998;17(1):77–97.
  5. Constantin M, Bednarik M, Jurchescu MC, Vlaicu M. Landslide susceptibility assessment using the bivariate statistical
    analysis and the index of entropy in the Sibiciu Basin (Romania). Environ Earth Sci. 2011;63(2):397–406.
  6. Dai FC, Lee CF, Li J, Xu ZW. Assessment of landslide susceptibility on the natural terrain of Lantau Island, Hong Kong.
    Environ Geol. 2001;40(3):381.
  7. Dou J, Yamagishi H, Pourghasemi HR, Yunus AP , Song X, Xu Y, Zhu Z. An integrated artificial neural network model for the
    landslide susceptibility assessment of Osado Island, Japan. Nat Hazards. 2015;78:1749–76.
  8. Ercanoglu M, Gokceoglu C, Van Asch TW. Landslide susceptibility zoning north of Yenice (NW Turkey) by multivariate
    statistical techniques. Nat Hazards. 2004;32(1):1–23.
  9. Lee S. Application of logistic regression model and its validation for landslide susceptibility mapping using GIS and
    remote sensing data. Int J Rem Sens. 2005;26(7):1477–91.
  10. Nefeslioglu HA, Duman TY, Durmaz S. Landslide susceptibility mapping for a part of tectonic Kelkit Valley (eastern black
    sea region of Turkey). Geomorphology. 2008;94:401–18.
  11. Nefeslioglu HA, Sezer E, Gokceoglu C, Bozkir AS, Duman TY. Assessment of Landslide Susceptibility by Decision Trees in the
    Metropolitan Area of Istanbul, Turkey. Mathematical Problems in Engineering; 2010.
  12. Pourghasemi HR, Pradhan B, Gokceoglu C. Application of fuzzy logic and analytical hierarchy process (AHP) to landslide
    susceptibility mapping at Haraz watershed, Iran. Nat Hazards. 2012;63(2):965–96.
  13. Pradhan B, Sezer EA, Gokceoglu C, Buchroithner MF. Landslide susceptibility mapping by neuro-fuzzy approach in a
    landslide-prone area (Cameron Highlands, Malaysia). Geoscience Remote Sensing. IEEE Trans. 2010;48(12):4164–77.
  14. Mersha T, Meten M. GIS-based landslide susceptibility mapping and assessment using bivariate statistical methods in the
    Simada area, northwestern Ethiopia. Geoenvironmental Disasters. 2020;7:20.
  15. Taloor AK, Adimalla N, Goswami A. Remote sensing and GIS applications in geoscience. Appl Comput Geosci.
    2021a;11:1–3.
  16. Taloor AK, Joshi MN, Kotlia BS, Alam A, Kothyari GC, Kandregula RS, Singh AK, Dumka RK. Tectonic imprints of land-
    scape evolution in the Bhilangana and Mandakini basin, Garhwal Himalaya, India: a geospatial approach. Quat Int.
    2021b;575–576:21–36.
  17. Taloor AK, Kothyari G, Goswami A, Mishra A. Geospatial technology applications in quaternary science. Quaternary Sci Adv.
    2022;7:100059.
  18. Shit PK, Bhunia GS, Maiti R. Potential landslide susceptibility mapping using weighted overlay model (WOM). Model Earth
    Syst Environ. 2016;2(1):21.
  19. Raghuvanshi TK, Ibrahim J, Ayalew D. Slope stability susceptibility evaluation parameter (SSEP) rating scheme–an
    approach for landslide hazard zonation. J Afr Earth Sc. 2014;99:595–612.
  20. Wang X, Niu R. Spatial forecast of landslides in three gorges based on spatial data mining. Sensors. 2009;9(3):2035–61.
  21. Courture R. Landslide Terminology—National Technical Guidelines and Best Practices on Landslides. Geological Survey of
    Canada; 2011. p. 12. Open File 6824.
  22. Panikkar S, Subramaniyan V. Landslide hazard analysis of the area around Dehra Dun and Mussoorie, Uttar Pradesh. Curr
    Sci. 1997;73:1117–23.
  23. Preuth T, Glade T, Demoulin A. Stability analysis of human-influenced landslides in eastern Belgium. Geophys J Roy Astron
    Soc. 2010;120:4–98.
  24. Nagarajan R, Roy A, Vinodkumar R, Khire M. Landslide hazard susceptibility mapping based on terrain and climatic factors
    for tropical monsoon region. Eng Geol. 2000;58:275–87.
  25. Ahmed B. Landslide susceptibility mapping using multicriteria evaluation techniques in Chittagong Metropolitan Area.
    Bangladesh Landslides. 2015;22:1077–95. https://doi.org/10.1007/s10346-014-0521-x.
  26. Kanwal S, Atif S, Shafiq M. GIS based landslide susceptibility mapping of northern areas of Pakistan, a case study of Shigar
    and Shyok Basins. Geomat Nat Haz Risk. 2016;5705:1–19.
  27. Ramesh V, Phaomei T, Baskar M, Anbazhagan S. Application of fuzzy gamma operator in landslide susceptibility mapping
    along Yercaud Ghat Road section, Tamil Nadu, India. Geostatistical and Geospatial Approaches for the Characterization

Page 22 of 23
Junaid et al. Discover Geoscience (2026) 4:456
of Natural Resources in the Environment: Challenges, Processes and Strategies. Cham: Springer International Publishing;
2016. pp. 545–53.
28. Ramesh V, Mani S, Baskar M, Kavitha G, Anbazhagan S. Landslide hazard zonation mapping and cut slope stability analyses
along Yercaud ghat road (Kuppanur–Yercaud) section, Tamil Nadu, India. Int J Geo-Engineering. 2017;8(1):2.
29. Saranaathan SE, Mani S, Ramesh V, Prasanna Venkatesh S. Landslide susceptibility zonation mapping using bivariate
statistical frequency ratio method and GIS: a case study in part of SH 37 Ghat Road, Nadugani, Panthalur Taluk, The Nilgiris.
J Indian Soc Remote Sens. 2021;49(2):275–91.
30. Zeeshan M, Mirza K. Landslide detection and susceptibility mapping using geological and remote sensing data: a case
study of azad kashmir, nw sub-himalayas. Acta Geodynamica et Geomater. 2021;18(1):29–44. h t t p s : / / d o i . o r g / 1 0 . 1 3 1 6 8 / A G
G . 2 0 2 1 . 0 0 0 2 .
31. Farr TG, Rosen PA, Caro E, Crippen R, Duren R, Hensley S, Alsdorf D. (2007). The shuttle radar topography mission. Rev
Geophys, 45(2).
32. Metternicht G, Hurni L, Gogu R. Remote sensing of landslides: An analysis of the potential contribution to geo-spatial
systems for hazard assessment in mountainous environments. Remote Sens Environ. 2005;98(2–3):284–303.
33. Anbalagan R. Landslide hazard evaluation and zonation mapping in mountainous terrain. Eng Geol. 1992;32(4):269–77.
34. Geological Survey of India (GSI). (2019). Bhukosh: National Geoscience Data Repository. Retrieved from h t t p s : / / b h u k o s h . g s
i . g o v . i n
35. Dai FC, Lee CF. Landslide characteristics and slope instability modeling using GIS, Lantau Island, Hong Kong. Geomorphol-
ogy. 2002;42(3–4):213–28.
36. Guzzetti F, Peruccacci S, Rossi M, Stark CP . The rainfall intensity–duration control of shallow landslides and debris flows: An
update. Landslides. 2008;5:3–17.
37. Brenning A. Spatial prediction models for landslide hazards: Review, comparison and evaluation. Nat Hazards Earth Syst
Sci. 2005;5(6):853–62.
38. Malczewski J. GIS and multicriteria decision analysis. Wiley; 1999.
39. Saaty TL. The analytic hierarchy process: Planning, priority setting, resource allocation. McGraw-Hill; 1980.
40. Fell R, Corominas J, Bonnard C, Cascini L, Leroi E, Savage WZ. Guidelines for landslide susceptibility, hazard, and risk zoning
for land use planning. Eng Geol. 2008;102(3–4):85–98.
41. Glade T, Anderson MG, Crozier MJ. Landslide hazard and risk. Wiley; 2005.
42. Guzzetti F, Gariano SL, Peruccacci S, Rossi M. Probabilistic landslide hazard assessment at the national scale in Italy. Geo-
morphology. 2012;172:138–49.
43. Ghosh SK. Structural geology: Fundamentals and modern developments. Pergamon; 1993.
44. Burbank DW, Anderson RS. Tectonic geomorphology. Wiley; 2012.
45. Crozier MJ. Landslides: Causes, consequences & environment. Croom Helm; 1986.
46. Junaid SM. The Classification of Land Use and Land Cover Conducted Using the Manual Method in Arcgis and Using AI /
Ml in Google Earth Engine for Salem District, Tamil Nadu, India. Curr Res Next Gen Mater Eng. 2025;1(1):01–9.
47. Junaid SM, Ilaiyarasan M. Land Use Land Cover Changes and Air Quality Impacts on Environmental Sustainability in Salem
District, Tamil Nadu, India. J Environ Pollut. 2025;1(1):1–12.
48. Mohammed J. Urban Development in the Western Part of Tamil Nadu (Kongu Nadu Region), India:A Temporal Study Using
Land use Land Cover Change Detection Analysis International. J Innovative Sci Res Technol. 2025;10(3):3074–86.
49. Drury SA. Image interpretation in geology. Allen & Unwin; 1987.
50. Ayalew L, Yamagishi H. The application of GIS-based logistic regression for landslide susceptibility mapping in the Kakuda-
Yahiko Mountains, Central Japan. Geomorphology. 2005;65(1–2):15–31.
51. Sidle RC, Ochiai H. Landslides: processes, prediction, and land use. American Geophysical Union; 2006.
52. Zêzere JL, de Brum Ferreira A, Rodrigues ML. Landslides in the north of Lisbon region (Portugal): Conditioning and trigger-
ing factors. Phys Chem Earth Part A. 1999;24(10):925–34.
53. Bishop MP , Shroder JF. Remote sensing and geomorphometric assessment of topographic complexity and erosion
dynamics in the Himalaya. Geomorphology. 2000;35(1–2):129–45.
54. Wilson JP , Gallant JC. Terrain analysis: Principles and applications. Wiley; 2000.
55. Hack JT. Geomorphology of the Shenandoah Valley, Virginia and West Virginia, and origin of the residual ore deposits. US
Geological Survey Professional Paper; 1965. p. 484.
56. Forman RT, Alexander LE. Roads and their major ecological effects. Annu Rev Ecol Syst. 1998;29:207–31.
57. Montgomery DR, Dietrich WE. A physically based model for the topographic control on shallow landsliding. Water Resour
Res. 1994;30(4):1153–71.
58. Van Westen CJ, Rengers N, Soeters R. Use of geomorphological information in indirect landslide susceptibility assessment.
Nat Hazards. 2003;30(3):399–419.
59. Soeters R, Van Westen CJ. Slope instability recognition, analysis, and zonation. Nat Hazards. 1996;15(2–3):125–45.
60. Gupta RP , Joshi BC. Landslide hazard zoning using the GIS approach—a case study from the Himalayas. Eng Geol.
1990;28(1–2):119–31.
61. Dai FC, Lee CF, Ngai YY. Landslide risk assessment and management: an overview. Eng Geol. 2002;64(1):65–87.
62. Regmi NR, Giardino JR, Vitek JD. Assessing susceptibility to landslides: Using models to understand observed changes in
slopes. Geomorphology. 2014;226:284–97.
63 Glade T (2003) Landslide hazard assessment and historical landslide data—an inseparable couple? Natural Hazards and
Earth System Sciences, 3(1/2): 153–168.
64 Guzzetti F, Carrara A, Cardinali M, Reichenbach P (1999) Landslide hazard evaluation: a review of current techniques and
their application in a multi-scale study, Central Italy. Geomorphology, 31(1–4): 181–216.
65 Hagedorn H, Rettenmaier D (2003) Weathering of ultramafic rocks and geotechnical implications. Zeitschrift für Geomor-
phologie, 47(3): 321–335.
66 Lambin EF, Turner BL, Geist HJ, et al. (2001) The causes of land-use and land-cover change: moving beyond the myths.
Global Environmental Change, 11(4): 261–269.
67 Lee S, Pradhan B (2007) Landslide hazard mapping at Selangor, Malaysia using frequency ratio and logistic regression
models. Landslides, 4(1): 33–41.

Page 23 of 23
Junaid et al. Discover Geoscience (2026) 4:456
68 Reichenbach P , Rossi M, Malamud BD, Mihir M, Guzzetti F (2018) A review of statistically-based landslide susceptibility
models. Earth-Science Reviews, 180: 60–91.
69 Selby MJ (1993) Hillslope Materials and Processes (2nd ed.). Oxford University Press, Oxford.
70 Sharma LP , Patel N, Ghose MK, Debnath P (2010) Assessing landslide vulnerability using remote sensing and GIS. Interna-
tional Journal of Remote Sensing Applications, 1(1): 12–18.
71 Taloor AK (2021c) Geospatial technology in hazard mapping and disaster management. In: Geospatial Technology for
Earth Observation and Disaster Management, Springer, Cham, pp. 215–230.
72 Thornbury WD (1969) Principles of Geomorphology (2nd ed.). John Wiley & Sons, New York.
73 Van Westen CJ, van Asch TWJ, Soeters R (2006) Landslide hazard and risk zonation -why is it still so difficult? Bulletin of En
gineering Geology and the Environment, 65(2): 167–184.
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

论文原文与出版信息

Discover Geoscience
查看论文原文

继续探索