论文信息
论文解读
AI 辅助整理- 方法
- 土壤湿度、温湿度、光照传感器加微控制器,Wi-Fi 传输远程监控。
- 发现
- 系统可早期识别环境异常,减少人工巡检并支持树木养护。
- 机会点
- 可结合树木生理指标与机器学习,从环境监测升级为健康状态预测与精准干预。
论文摘要
基于物联网的树木健康监测系统 基于物联网的树木健康监测系统旨在利用物联网(IoT)技术监测树木的健康状况和环境条件。该系统使用四种传感器:土壤湿度、温度、湿度和光照强度传感器,以采集实时环境数据。微控制器对采集到的数据进行处理,并通过Wi-Fi传输以实现远程监测。当检测到异常条件时,系统会生成警报以通知用户。该项目有助于在早期阶段识别环境问题,减少人工监测,并支持有效的树木养护。它提供了一种智能、高效且具有成本效益的方法,以改善树木健康监测和环境可持续性。 关键词:物联网(IoT),树木健康监测,传感器,土壤湿度,环境监测,Wi-Fi,智慧农业。
全文
Zenodo (CERN European Organization for Nuclear Research)2022 10th IEEE International Conference on Emerging Trends in Engineering & Technology Signal and Information
Processing (ICETET-SIP)
978-1-6654-6741-4/22/$31.00 ©2022 IEEE
Design of An IoT based Smart Plant Monitoring
System
1Apeksha Rane
Electronics and Telecommunication Department
G H Raisoni College of Engineering
Nagpur, India
apeksha.rane.mtechcom@raiosni.net
3Priyanka Hemant Kale
Electronics and Telecommunication Department
G H Raisoni Institute of Engineering and Technology
Nagpur, India
priyanka23kale@gmail.com
2Bhushan Vidhale
Electronics and Telecommunication Department
G H Raisoni College of Engineering
Nagpur, India
bhushan.vidhale@raisoni.net
4Ganesh Khekare
Computer Science and Engineering Department
Parul Institute of Technology
Gujarat, India
khekare.123@gmail.com
Abstract— In IoT plant monitoring system we can monitor
and control with the help of IoT concepts. The gasses pr oduced
by the plant in Day time and nighttime will be monitored on
IoT cloud. And according to the moisture of the soil t he water
pump supply to the plant will be controlled. If moistur e is seen
below the certain threshold value, then the pump will get
turned on and when moisture reaches above the threshold level
then the water pump will be turned off by the controller in the
system. The Temperature and humidity will be sensed by
smart sensors digitally. The hazardous gas will be se nsed by
the other sensor at that place. The controller which is
integrated in the system will send all the monitored par ameter
and different gasses data on IoT Cloud with the help of Wi -Fi
and IoT system. Other circuitry is used to control the relay and
to provide power supply to the system. On the IoT cloud the
data will be received on the google firebase Real-time database.
From that it will be transferred to the AWS server and all the
data will be visualized by different gauges and past data will be
plotted.
Keywords— IoT, Moisture, Temperature, Humidity
I. INTRODUCTION
A system to monitor temperature, humidity, CO2, Nit rogen
and other Gasses levels of moisture in the soil has used.
Agriculture is one of the important occupations in India.
Also, the main element required for agriculture is water.
This project will be used to monitor and analyze th e water
requirement for the plant by switching the designed motor
on and off which will basically depend on the atmos pheric
conditions around the plants. In this generation pe ople
prefer to grow the plants at the backyards or in th e available
open space nearby and thus this will surely help th em in
growing plants in small scale farming to provide the best out
of the output.
Doing this specific activity will result in proper and efficient
use of water in small scale farming process. As in India
there is the scarcity of water in many of the regio ns the
proper use of water is must, otherwise there can be damage
in the plants or the soil. Using this the small sca le farmer
can easily handle the crop situation taking the cli mate into
consideration. This will basically develop the farm ing
activities and make it simpler for the small scale farmers to
get the satisfactory output out of it.
Agriculture usually requires more of the manpower b ut by
using this the manpower can be reduced making it mo re
suitable for farmers to act as per the favorable cl imatic
conditions. Monitoring the plants is important in o rder to
produce more quality crops and more quantity produc tion.
Using this automated system will also reduce the us ual
mistakes and errors in farming which costs a great damage
in crops. This all can be conducted on a smart phon e and
therefore it will be easy for them to work on it an d control
the crops as required. This can be the most cost-ef ficient
way to work in order to get optimum produce without any
compromise with the accuracy of the system.
This system is not only used for watering purpose b ut also it
conducts certain more activities like analyzing the
surrounding of the plants which will definitely act as one of
the important factor in farming.
II. LITREATURE SURVEY
Let’s take various previous papers into considerati on by
various different researchers. Agriculture has the need to
reduce the manpower and increase the production. Us ing
different controllers research was made on Monitori ng
greenhouse and the control system by MarwaMekki et al[1],
here it is seen that wireless sensor network has be en
designed by the nodes that are wireless inside the green
house having certain sensors of temperature, gas, e tc. the
control over these factors was necessary and thus t he
microcontroller was programmed as per the needs. Pr of.
Prachi Kamble [2] Taking this information in accoun t we
have used the DHT11 sensor module to detect the
information regarding temperature.
A zigbee based project was made by K. LokeshKrishna et
al[3], which was basically used to control and hand le the
system which was further designed using the process or
ARM 7 . the sensors for different uses were also in stalled
with the communication panel. This all was done to reduce
the man power required for all the agriculture purpose.
2022 10th International Conference on Emerging Trends in Engineering and Technology - Signal and Information Processing (ICETET-SIP-22) | 978-1-6654-6741-4/22/$31.00 ©2022 IEEE | DOI: 10.1109/ICETET-SIP-2254415.2022.9791690
Authorized licensed use limited to: VISVESVARAYA NATIONAL INSTITUTE OF TECHNOLOGY. Downloaded on May 01,2023 at 07:12:40 UTC from IEEE Xplore. Restrictions apply.
Using the PIC microcontroller the green house monit oring
system was made by S. ArulJai Singh et al[4]. It in cludes
the designed system that is used to monitor or gain the
temperature value, including humidity also the mois ture
present in soil with the sunlight that is required for the
growth of the plant Yogendra Parihar[5], Mahir Durs un and
Semih Ozden[6]. All these factors are monitored to gain the
most of the production and high quality gain. The
controllers used here are for the real time use tha t is the
drainage and light control in greenhouse.
The paper for solar based PV conditioning power. Th is
particular writing mentions the design of remote an d
controlling system that is based on solar S. Harish ankar, R.
Sathish Kumar, Sudharsan K.P, U. Vignesh
andT.Viveknath[7]. the Photovoltaic (PV) Power
Conditioning which is basically used in a environme nt of
greenhouse. The structure of this system that is us ed to
monitor is used using IoT. Pavithra D.S, M. S .Srin ath[8]
This is used using internet with use of host, netwo rk GPRS.
This was build to gain the maximum produce in the w orst
case scenarios. The information is further sent to the android
used to take actions LaxmiShabadi, NandiniPatil, Ni kita. M,
Shruti. J, Smitha. P&Swati.C [09].
III. PROPOSED SYSTEM
H ARDWARE COMPONENTS
-
Sensors (Moisture, DHT11, MQ135)
-
ESP8266 Wi-Fi module
-
Node MCU
-
Water Pump
-
Relay Circuit
S OFTWARE COMPONENTS
-
Google firebase
• DHT11 Sensor Module:
This sensor module is the 3-pin module which includ es the
ground, data and Vcc. This is used in this project to gain the
value of humidity and required value of temperature that
will be required in this proposed system. This sens or has the
range of temperature from 0 C to 50 C. and the humi dity is
gained in the range of 20% to 90 %.
Fig. 1 DHT11 sensor
• Node MCU:
Node MCU is an IOt platform which is open sourced and
low cost. The firmware that works on ESP8266 Wi-Fi is
included in this node MCU. Node MCU is the modified
microcontroller used the project purpose as it the electronic
prototyping platform.
Fig. 2 Node MCU
• MQ135:
The MQ-135 is basically used in controlling the air
quality equipment that are certainly used in
buildings in order to detect NH3, CO2, Alcohol,
Benzene etc. This MQ135 in this project will be
used in order to detect the gases around the plant.
Fig. 3 Node MCU
• Sensor for moisture in soil:
This sensor of soil moisture is required to measure the
content of water in volumes which is basically done
using the two probes that are connected to the sens or.
This attached probe allows to gain the value of moi sture
in the soil by passing the current in the soil. The inverse
proportion of the current and resistance is require d to
gain the moisture in the soil. Therefore, when ther e is
more water in the soil the value of resistance is l ow and
similarly when water present is less the value of c urrent
is low and resistance value is high. Two different
modes are used to connect this one is the analog mo de
and other is the digital one.
Authorized licensed use limited to: VISVESVARAYA NATIONAL INSTITUTE OF TECHNOLOGY. Downloaded on May 01,2023 at 07:12:40 UTC from IEEE Xplore. Restrictions apply.
Fig. 4 Sensor for moisture in soil
• Relay Circuit:
Here relay circuit is used to switch on and off the electronic
valve which is controlled by the Arduino the electr onic
valve works on 12 V supply to provide 12 V to elect ronic
valve relay circuit is used using Arduino we can sw itch on
and off the relay which will controlled the switchi ng
operation of Heater
Fig. 4 Relay circuit
• Transistor:
Transistor BC547 is used for switching purpose. As the
water pump works on 10v and microcontroller works o n 5v
so to switch the supply between these two elements we use
the required transistor.
Fig. 5 BC547
IV. SYSTEM IMPLEMENTATION
An important factor such as temperature and humidit y of the
environment Can be monitored using DHT 11 The contr ol
on the temperature is done using DC motor which act s as
cooling mechanism. Temperature and the humidity wil l be
sensed by DHT11 sensor digitally. The CO2 gas will be
sensed by the MQ135 sensor and Other MQ sensors is also
provided for the knowledge of the different atmosph ere
released gasses of that surrounding.
The ESP8266 microcontroller is used to send all the
monitored parameter and different gasses on IoT Clo ud
using Wi-Fi. And to monitor a moisture in soil the moisture
sensor is used and also relay for controlling water pump to
maintain the moisture sensor of the soil. All the s ensors are
interfaced with ESP8266 micro-controller and regula ted DC
power supply is used. The water level in the soil i s detected
using the soil moisture detector and further action s are taken
accordingly. The circuit diagram is mentioned below
Fig. 6 Circuit Diagram
The block diagram of monitoring system is as shown below.
Fig. 7 System Design for smart plant monitoring
Authorized licensed use limited to: VISVESVARAYA NATIONAL INSTITUTE OF TECHNOLOGY. Downloaded on May 01,2023 at 07:12:40 UTC from IEEE Xplore. Restrictions apply.
V. EXPERIMENTAL RESULT
As mentioned and as tested the project results in the
accurate manner which includes the various factors. The
automatic switching of the pump is seen when the server is
connected and all the connected devices start working which
will then save the plants from the harmful unexpected
weather.
VI. CONCLUSION
The previous work on the monitoring system was
automatically switching on the pump taking the othe r
detected factors in account but here in this paper the
detection of the hazardous gases is also done where one can
get detail information about the atmosphere nearby. As we
are aware of the occupations in India, one of the m ost
important occupation is Agriculture which is very t ime
consuming also water requiring occupation. This pro posed
system is basically used to monitor the important f actors of
the crops under the unfavorable conditions includin g the
atmospheric conditions. The sensor used will result in
giving the values of the important factors includin g the
humidity, temperature, gases of the surrounding whi ch will
be taken into consideration in order to reduce the damage to
the crop. This will effectively increase the produc tion
having quality assurance thus reducing the manpower
required. This automation will handle the irrigatio n actions
using the gained value of certain important factors in the
growth of the plants which will automatically reduc e the
chances of damaging the area. This proposed work w ill
help small scale farmers to work and harvest effect ively to
gain more and more good quality crops and other out put
related to it.
REFERENCES
[1] Marwa Mekki2 ,Osman Abdallah1 , Magdi B. M. Amin2, Moez
Eltayeb1,Tafaoul Abdalfatah2 , Amin Babiker3, “Gree nhouse
monitoring and control system based on wireless Sen sor Network ”,
IEEE Trans. Syst. ,Man , Cybern. C,Appl.Rev.,vol.37 ,no.3,pp.311-
314,May 2007
[2] SMART PLANT MONITORING SYSTEM”, International Journal of
Advance Research in Science and Engineering, Vol. N o. 7.Prof.
Prachi Kamble, “IOT Based Plant Monitoring System”, ITIIRD, Vol.
No. 2.
[3] K.Lokesh Krishna ,J.Madhuri and Dr.K.Anuradha, “A Z igBee based
Energy Efficient EnvironmentalMonitoring Alerting a nd Controlling
System”, IEEE Trans.g,vol.3,no.1,pp.186- 190,2009.
[4] Arul Jai Singh.S1, Raviram.P2, ShanthoshKumar.K3, “ EMBEDDED
BASED GREEN HOUSE MONITORING SYSTEM USING PIC
MICROCONTROLLER”, IEEE Trans. Syst , Man, Cybern . A ,
Systems and Humans, vol. 41, no. 6, pp.1064-1076, November 2011
[5] Yogendra Parihar, “Internet of Things and Node MCU” , JETIR, Vol.
No. 6. Gabriel, “Monitoring Moisture and Humidity u sing Arduino
Nano”, IJERT, Vol. No. 9
[6] Mahir Dursun and Semih Ozden, “A wireless applicati on of
dripirrigation automation supported by soil moistur e sensors”,
ScientificResearch and Essays, Volume 6(7), pp. 157 3-1582, 4 April,
2011.
[7] S. Harishankar, R. Sathish Kumar, Sudharsan K.P, U. Vignesh
andT.Viveknath, “Solar Powered Smart Irrigation Sys tem”, Advance
inElectronic and Electric Engineering, Volume 4, Number 4 (2014)
[8] Pavithra D.S, M. S .Srinath, “GSM based Automatic IrrigationControl
System for Efficient Use of Resources and Crop Planning byUsing an
Android Mobile”, IOSR Journal of Mechanical and Civ ilEngineering
(IOSR-JMCE) Vol 11, Issue I, Jul-Aug 2014, pp 49-55.
[9] LaxmiShabadi, NandiniPatil, Nikita. M, Shruti. J, S mitha.
P&Swati.C, “Irrigation Control System Using Android and GSM for
EfficientUse of Water and Power”,International Jour nal of
AdvancedResearch in Computer Science and Software E ngineering,
Volume4, Issue 7, July 2014.
[10] R.Suresh, S.Gopinath, K.Govindaraju, T.Devika,
N.SuthanthiraVanitha, “GSM based Automated Irrigati on
Controlusing Raingun Irrigation System”, Internatio nal Journal of
AdvancedResearch in Computer and Communication Engi neering
Vol. 3,Issue 2, February 2014.
[11] Shiraz Pasha B.R., Dr. B Yogesha, “Microcontroller BasedAutomated
Irrigation System”, The International Journal OfEng ineering And
Science (IJES), Volume3, Issue 7, pp 06-09, June2014.
[12] S. R. Kumbhar, Arjun P. Ghatule, “Microcontroller b ased
ControlledIrrigation System for Plantation”, Procee dings of the
InternationalMultiConference of Engineers and Compu ter Scientists
2013VolumeII, March 2013.
[13] Yunseop (James) Kim, Member, IEEE, Robert G. Evans, andWilliam
M. Iversen, “Remote Sensing and Control of an Irrig ation System
Using a Distributed Wireless Sensor Network”, IEEE
TRANSACTIONS ON INSTRUMENTATION
ANDMEASUREMENT, Volume 57, Number 7, JULY 2008.
[14] Venkata Naga RohitGunturi, “Micro Controller Based
AutomaticPlant Irrigation System”, International Jo urnal of
Advancements inResearch & Technology, Volume 2, Iss ue4, April-
2013.
[15] Prof. Pankaj H. Chandankhede, “Design of ARM based Enhanced
Event Data Recorder & Evidence Collecting System”, IOSR Journal
of Electronics and Communication Engineering, Volum e 9, October
2014.
[16] Dorle, Sanjay S; Vidhale, Bhushan; Chakole, Megha, “Evaluation of
multipath, unipath and hybrid routing protocols for vehicular Ad hoc
networks”, 2011 Fourth International Conference on Emerging
Trends in Engineering & Technology, pp 311-316, (IEEE) 2011.
[17] Vidhale, Bhushan; Dorle, Sanjay S, “Performance ana lysis of routing
protocols in realistic environment for vehicular Ad Hoc networks”,
2011 21st International Conference on Systems Engin eering, pp 267-
272, IEEE 2011.
[18] Vidhale, Mr Bhushan R; Khanapurkar, MM, “Design of Low Cost
and Efficient Strip Line Band Pass Filter for Bluet ooth Application.”,
IJERA, 2012.
[19] Vidhale, Bhushan R; Khanapurkar, MM, “Design of ult ra wideband
low noise amplifier with the negative feedback usin g micro strip line
matching structure for multiple band application an d its simulation
based performance analysis”, 2016 International Con ference on
Wireless Communications, Signal Processing and Netw orking
(WiSPNET), pp 1845-1848, IEEE, 2016.
[20] Vidhale, Bhushan; Khekare, Ganesh; Dhule, Chetan; C handankhede,
Pankaj; Titarmare, Abhijit; Tayade, Meenal, “Multil ingual Text &
Handwritten Digit Recognition and Conversion of Reg ional
languages into Universal Language Using Neural Netw orks”, 2021
6th International Conference for Convergence in Tec hnology (I2CT),
IEEE, May 2021.
[21] Vidhale, SS Dorle Bhushan; Chakole, Megha, “Evaluat ion of
Multipath, Unipath and Hybrid Routing Protocols for Vehicular Ad
Hoc Networks”, Fourth International Conference on Emerging Trends
in Engineering & Technology, IEEE-2011.
[22] Khekare, Ganesh; Wankhade, Kapil; Dhanre, Urvashi; Vidhale,
Bhushan, ” Internet of Things Based Best Fruit Segr egation and
Taxonomy System for Smart Agriculture”, IoT and Cloud Computing
for Societal Good, pp 37-57, Springer, 2022.
Authorized licensed use limited to: VISVESVARAYA NATIONAL INSTITUTE OF TECHNOLOGY. Downloaded on May 01,2023 at 07:12:40 UTC from IEEE Xplore. Restrictions apply.
Authorized licensed use limited to: VISVESVARAYA NATIONAL INSTITUTE OF TECHNOLOGY. Downloaded on May 01,2023 at 07:12:40 UTC from IEEE Xplore. Restrictions apply.
论文原文与出版信息
Zenodo (CERN European Organization for Nuclear Research)